Want to buy a used excavator for mining? When it comes to reliability, the names that come up time and time again are Caterpillar, Komatsu, and Hitachi. These companies are known for their engines that last forever, the heavy build of their equipment, and the fact that you can get parts all over the world. As far as mining goes, Caterpillar is considered especially reliable because of its ability to hold up to the extreme conditions and its high performance.
Caterpillar and Komatsu are considered the most reliable brands in the excavator industry, offering durable machines suitable for mining operations.
CAT excavators have a great reputation for use in mining due to their ability to hold up under those tough conditions. Whether it’s the CAT 320 or the CAT 336, they are built to take the abuse of heavy-duty mining. Komatsu’s PC series is also well-respected for the same reason. When buying a used model, you’ll want to look at its maintenance records and the condition of the engine specifically, because reliability will often come down to how well the machine has been maintained.
1,What is the most used excavator for mining?
The CAT 320 and Komatsu PC200 are popular choices of used excavator for mining. They’re versatile, efficient, and capable of handling a decent load. These machines can handle a variety of tasks that would require a lot more work by hand or using other equipment. Because they have big engines and sick hydraulics, you can easily use them for the task at hand, which is essential when you’re mining.
The CAT 320 and Komatsu PC200 are very common in the mining industry because they’re versatile and powerful, and usually, the most robust and powerful machine you can have in your mining operation.
The Komatsu PC200, for example, has been a workhorse in mining for years because it gets so much work done. And, the cost is relatively reasonable compared to some of the bigger model machines you can buy. On the flip side, a CAT 320 might have a bit more of an edge because it does have advanced hydraulics and fuel efficiency. People around the world are using CAT 320s to get the work done in all kinds of mining projects. These two machines hold their value well and are reliable in rough mining conditions.
2,How much does a mining excavator cost?
The cost of a used excavator for mining can vary depending on the size, brand, and age of the equipment. A brand new mining-sized excavator is going to run from $80,000 up to half a million or more dollars. If you’re looking to buy a used excavator, you can get a bargain. A lot of used excavators are out there, but the prices will vary depending on their hours and the condition the equipment is in. So, if you want to start of used excavator for mining operation, this is a financial number you need to know.
While you can save money upfront by purchasing a used excavator for mining, there are additional factors and costs to consider. These factors include the overall condition of the machine and how many hours it’s been used on the job site. Furthermore, don’t forget to take into account the cost of maintenance, the availability of replacement parts, and the cost to, “Man, I hope this thing runs just one more day.”
It’s also a great time for you to figure the cost of taking the machine to your mining site. The costs associated with moving these machines, running these machines, and maintaining these machines for your mining operation can add up.Even though you will save money up front by buying a used excavator, you have to keep in mind your machine’s overall condition and how many hours they ran it.
All those other factors and costs you probably didn’t think about come into play. The costs for maintenance, parts cost to fix the machine, the cost to man, “Man, I hope this thing runs just one more day,” take all that into consideration. It’s also a great time to consider how much it’s going to cost to move the machine to your mining site. The costs of moving these machines, running these machines, and maintaining these machines for your mining operation can add up.
3,What is the best type of excavator for mining?
Crawler excavators are the best way to go in mining. The reason of used excavator for mining are always in mining is they’re stable, they can cross rough ground, and they can cover the terrain you have to manage. Because of the track system on the crawler, the weight of the machine is evenly distributed, which is essential for mining and construction. You want to use crawler machines in a situation where you’re digging or moving a large amount of weight in and out of the hole as quickly and efficiently as possible.
The best way to go in mining is a used excavator for mining. The reason why you use crawler machines is that they’re stable. They can cross rough ground, and they can put up with the terrain you have to manage. A lot of times in mining and construction, because of the track system, the weight of the machine is evenly distributed (it’s a ground pressure thing). You want a machine like that when you’re in a situation where you’re trying to dig or move a hell of a lot of weight going in and coming out of that hole as fast and as efficient as possible.
While wheeled excavators may be faster on flat surfaces, they lack the stability needed for mining. Crawler excavators, such as the Komatsu PC series or CAT 330, can dig deeper and handle heavier loads. Ensure the excavator has features like reinforced undercarriage and powerful hydraulics for the best performance in mining projects.
4,What is the life expectancy of a mining excavator?
A good life expectancy for a usd excavator for mining, is somewhere between 10,000 and 12,000 hours with tenant proper maintenance and didn’t push it too hard. Can they run longer? Yes, but it costs a lot of money in labor, parts, and has a higher opportunity cost than what you’re buying. So a decent life span for an excavator in mining activities is ten to twelve thousand hours, capped tenant on the job site and the occasion.
5,Is 5000 hours a lot for a used excavator?
For a used excavator for mining, 5,000 hours can be seen as moderate usage. Once again, you don’t want to marry yourself to a machine with 5,000 hours and say, “I can’t buy this machine or consider anything above 5,000 hours.” The machine’s maintenance history is more important than the number of hours on the hour meter. So, a machine with 5,000 hours might be the perfect machine to start a mining operation.
Remember, you can buy all the hours you want, but you’ll pay every hour you run that machine. Don’t get hung up on the number of hours the machine shows on the display. Look at the machine, the price, and the overall condition. Will the machine perform as promised? Do you believe the seller? Will the seller sell you a good machine for a fair price? Those are your keys.
Once again, if you’re going to buy a machine with 5,000 hours on it, then you need to do your due diligence and inspect the machine. Please do not take anything for granted. Do your visual inspection. Sit in the operator’s seat, test the boom and stick performance, and make sure the controls work like they should. Look at the hydraulics (and behind the hydraulics) for oil leaks, watch the engine, and check the teeth on your bucket. I’ve seen machines with 5,000 hours last another 10-12,000 hours after people bought them.
Proper maintenance can extend the life of an excavator well beyond 10,000-12,000 hours. So if you find a machine with 5,000 hours to start your mining operation, then buy it in the poor, judgment to average pricing range. If the machine is in good to excellent condition, then you’ll have a great machine to get your mining operation started. Do the same inspection on a machine with 5,000 hours that you’d do with a machine that has 10 or 20,000 hours on it. A good machine is a good machine.
6,How much does a 10-ton excavator cost?
A ten-ton machine can cost anywhere from 30,000to30,000to100,000. The price fluctuates based on the brand, the year, and the condition of the machine. You also need to consider whether you could benefit from a heavier-duty machine in a mining operation over an equivalent-sized machine with a light-duty undercarriage, bucket structure, and overall build. Sometimes buying bigger is cheaper in the long run.
Always keep in mind the old saying, “He who buys cheap, buys twice.” Keep the price and the application of the excavator balanced because, in the end, an excavator will dig you a hole. So look at the prices and the applications for your excavation needs.
If you start your mining operation by a used excavator for mining and do a good job of picking what you’re digging, loading, and lifting with your excavator, you could probably get away with a small size machine. But remember what I said earlier; the smaller the machine, the harder you make it work. Before you buy anything, decide if a lighter, smaller machine will be appropriate for your application.
Also, explore parts availability, warranty, and after-sale service on the machine you think best fits your short- or long-term needs. Also, look at your budget and decide how much money you are willing to throw at your mining operation. That’s a big one. How much do you want to spend on your mining ambition in the form of the right excavator?
7,What is the most popular excavator size for mining?
The most popular size of the used excavator for mining is the 20 to 30-ton size. These sizes offer the right combination of horsepower, hydraulic power, and mobility on your site to move dirt quickly, load big trucks fast, and handle the big loads you need moved in your mining operation. Smaller machines (like a ten-ton size) can do the job but keep in mind that even though the little machines may be fun or look cute, they have to work harder to keep up with and do the work of the bigger machines. Consider this when looking at excavators for your mining operation.
The same goes for the next grouping, the 20 to 30-ton size. In the great, grand scheme of mining, the 20 to 30-ton size used excavator for mining are the best fit. These machines offer the right combination of horsepower, hydraulic power, and machine to move dirt, load big trucks, and take a massive piece of dirt and set it wherever you want. The main thing to remember is the more extensive machines move dirt better. The big machines dig and load a truck with dirt or slate faster than the small machines. They also make better trap doors in a roof fall or load a truck with an ore or waste better than a small machine.
The best size of the machine depends on your used excavator for mining operation. A CAT 330 or Komatsu PC350 are popular choices in this size range. These machines are well-known for their power, the advanced hydraulics, fuel efficiency, and their abilities to handle big jobs in mining. Consider what kind of mining operation you plan to run and the machines required to run it before you start pulling the trigger on excavators for your army of machines (whether it’s a one-man show or a staff of hundreds).
8,What excavator has the best resale value?
In the world of mining, CAT machines, including the CAT 320 and the CAT 336, are the best excavators can buy. These two can hold the highest value if you maintain them and don’t wear them out or beats them to death. Do they cost more than some yellow machine made in England? Yes, but a pain now save heartache later. Are there other popular brand selling machines on the used market? Yes, Komatsu and Hitachi machines have good resale value, too, especially ones that have regular service. A well cared for machine, kept inside a shed, and serviced regularly bring top dollar on the second machine market.
Used excavator for mining with low hours and good service records are the perfect machines to buy for your mining operation unless it’s outside your budget. Save all service records (and warranty too, if you’ve got one). When it comes time to sell your excavator, you’ll garner top dollar. The secondary market for these machines is global. So, do a good job maintaining your machine, using it on the right job, and keeping it in good condition.
You’ll get nearly all the money back when it’s time to upgrade to a new excavator. Your goal when you maintain your machine is to sell it for as much money as you can. Do that from the beginning and save on the back end when you want to upgrade.
Summary
The best used excavator for mining operation requires you to look at the brand name of the machine (are they known for reliability), the number of hours on the machine, the weight of the machine, and the price the seller is asking for the machine. For the most part, the bigger the machine, the more it costs you to buy, run, and maintain the machine. Some things to consider before pulling the trigger on a used excavator for your mining operation include CAT 320 or the Komatsu PC series. Both are tough, durable machines, well suited to life in a mining environment. Inspect the machine thoroughly.
No matter how great the warranty is, you’ll pay for every hour you work that machine unless it’s someone else’s. Look at the hydraulics, engine, buckets, and overall condition of the excavator’s working parts. Then you can decide if the used excavator in the shape you see it, and the price you can afford it better you and your mining operation. Also could contact with us for used excavator for mining.